Two things: 1. I opened the link you provided and viewed the video.A green LED comes on and the numbers are 000 and are shown in RED.
So on the computer I copy some styles to a USB stick, plug the stick into the emulator, turn the PSR on, press D, and then press the NEXT button until FLOPPY appears. The PSR asks if I want to format the disk and if I select YES a LED on the stick flashes for 2 or 3 minutes and the PSR says NOW FORMATTING. The LED on the stick stops flashing but nothing else happens. Apparentally their SFR1M44-U100K unit is the one to use on Yamaha keyboards.(what is your model number). And here is the link to their website. PDFs for their products. Good luck. I put it there because I had problems getting the emulator to work. I read tonight several statements on the internet that reversing the ribbon cable to the emulator so that the red stripe is at pin 32 instead of pin 1 makes the emulator work. I suppose I could get out the earlier emulator and work with it a bit. Hopefully somebody here can tell me exactly what they did to get the emulator to work on their PSR 2000. I have been using an Gotek emulator (bit older model) on a PSR2000 for 10 years now almost every day without a problem. NoA after the 100. I also had a look under the hood of the one I just bought. Nowhere is there any sticker or other marking stating the model number. The older one has more components on its PCBA, has a 2-digit display, has only one jumper on it (that is connected to only one pin), has a different green LED setup, has a red push-push button on it below the green LED, and came in a cream-colored case. The newer one has fewer components on its PCBA, a PCBA that differs from the one in the older emulator, has a 3-digit display, has two jumpers on it (one across S1 and one across J5 and JA), has no red button on it, and it came in a black case. It would be nice to know just where to put the jumpers on the new emulator. Gotek Usb Floppy Emulator Software Software Disk CameNo instructions and no software disk came with either emulator. I looked on the internet but couldnt find any software that might be usable, and I dont recall anybody else on this forum stating he or she had to do anything with the emulator other than connect it and use it. From what I gather, you must format the USB stick on a PC and when you do you will then have either 100 (old one) or 1000 (new one) FDs on it. In any event, perhaps somebody else could chime in with a handy hint. Good luck ( mine is underway and i am going to hardware mod it with oled and rotary encoder to be used in my ancient MSX). Gotek Usb Floppy Emulator Software How To Handle TheMaybe you like to have a look at this youtube tutorial Its about how to handle the usbstick using software on a pc.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |